4 Quick Tips To Increase The Lifespan Of Bed Frames

Bed frames are usually made of wood, but other materials are available too. Some people prefer metal bed frames. They’re easier to adjust and weigh less than wooden frames. In addition, metal bed frames are generally durable and can last for decades. If you want to increase the lifespan of your bed frames, here are some quick tips that will help you. Check this site to buy bed frames online.

Reconnect joints:

One simple way to increase the lifespan of your bed frame is to reconnect the joints:

Measure the split in the bed frame from the inside.

Cut a scrap piece of wood half an inch wider than the split.

Drill staggered holes through the wood to reinforce the joints.

You can use a power drill to secure the wood to the inner lip of the bed frame. You can ask Home Depot employees to cut the wood if you’re not handy with tools. Once you’ve positioned your wooden slats, place them 2 1/2 feet apart from the center bar of the bed frame.

Add bed slats:

Adding bed slats to bed frames can make the bed more supportive. The slats should bend under the mattress and not sink in over time. They also provide a firmer bed because they bend with the movement of the mattress. The slats can be made of wood or metal, depending on the bed type.

Tighten screws:

One of the easiest ways to increase the lifespan of bed frames is to tighten the screws. This can be done with a screwdriver or a wrench. You should also use washers to fill in gaps created by loose screws. Alternatively, you can use a piece of scrap material to line the middle bar of the frame. This will reduce the noise caused by the frame.

Install bed wedges:

One of the best ways to raise the lifespan of a bed is to install bed wedges. These can be a simple wooden slab or a specially designed adjustable wedge. They are great for those suffering from back and neck pain and other health issues. Moreover, they add a layer of comfort to the bed by raising the head and neck.